Schmalz offers predefined robot sets. These sets contain everything needed to implement the gripper on the robot. Depending on the robot type, the sets are used with the corresponding software module. If further Schmalz products are required, they can be easily assembled or extended according to the modular principle.
In addition to manual parameterization of the products via push buttons, the grippers also come with an NFC interface. The data is set via NFC interfaces and the operating instructions or error messages can be read out on the smartphone in the “Schmalz ControlRoom” app.
Depending on the robot type, we also offer grippers with a bus interface. This means that the gripper can also be set up via the robot controller. The cobots are then taught the movement by hand guidance. The robot is usually ready for operation in less than an hour.